Select a Category to explore
Leg Pads
  1. HyperComp Thigh Rise improves stopping power in the butterfly for better 5-hole coverage.
  2. Torsional Core design for traditional feel & added mobility.
  3. New high density face for faster rebounds.
  4. Boot Taper for improved mobility.

Leg Pads
  1. Standard outer roll height provides stopping power that prevents pucks from skipping over the pad.
  2. Two outer knee wing options for a custom fit & feel depending on knee pad size.
  3. 360 Degree Active Drop Leg Channel for increased 5-hole coverage & added mobility.
  4. Added length & stability to knee block from previous R/GT.
  5. Customizable fit Slingwrap design.

Trapper
  1. New thumb shape creates a more conventional feel & increases game ready snappiness out of the box.
  2. New double tee pocket increases pocket size & puck retention.
  3. HyperComp increases protection across the catching surface of the trapper.
  4. Open cuff design allows the goaltender to present trapper square to the puck without chest & arm interference.
  5. New 75 degree catching angle.
  6. New tee construction improves stopping power & open/closure snappiness.

Blocker
  1. New HyperComp blocker face & sidewall for faster rebounds & improved board stability over time.
  2. Bindingless perimeter reduces weight & improves durability.
  3. Contoured sidewall aligns with the goalie's stick to prevent puck impacts against the finger.
  4. Adjustable open cuff design for enhanced rebound control.
  5. Customizable fit, feel & board positioning.
  6. Adjustable & removable index finger protection.
  7. Adjustable 3D molded caps for optimum protection & feel.

Leg Pads
  1. CoverEDGE+ face-forward design further cuts down to puck for improved coverage.
  2. Raised face of the pad seals against the post in RVH.
  3. Increased rebound speed.
  4. HyperComp thigh rise improves stopping power in the butterfly for better 5-hold coverage.
  5. AIRslide for improved sliding and consistent performance during poor ice conditions.

Leg Pads
  1. CoverEDGE+ face-forward design further cuts down angle to the puck for improved coverage.
  2. 360 DualFIT leg channel for tighter or looser leg channel settings.
  3. Beveled knee block for improved mobility during transitions.
  4. Two outer knee wing options for a custom fit & feel depending on knee pad size.
  5. Adjustable calf wrap strap length for custom fit & feel.

Trapper
  1. New increased pocket size.
  2. HyperComp increases protection across the catching surface of the trapper.
  3. CoverEDGE+ face-forward design positions trapper for improved coverage to the puck.
  4. Open cuff design for maximum wrist mobility.
  5. 75 degree liner stock. (60 & 90 degree liners available)
  6. AxyFlex tee contstruction for added stopping power that directs pucks into the pocket.
  7. 3-Dimensional back hand padding for extra protection in RVH and covering the puck.

Blocker
  1. HyperComp blocker face & sidewall for faster rebounds and improved board stability over time.
  2. CoverEDGE+ face-forward blocker board shape for improved coverage.
  3. Removable palm for customizable fit, feel & board positioning.
  4. Adjustable open cuff design for improved wrist mobility.
  5. Bindingless perimeter reduces weight & improves durability.
  6. Adjustable index finger & 3D molded finger caps for optimum protection & feel.

Chest & Arms
  1. HyperComp inserts increase protection and stability in high impact zones.
  2. Double shield front elbow floater maximizes protection against high speed shots.
  3. Squared biceps maximize coverage and enhance rebound control in the upper arm section.
  4. Rounded shoulder shape decreases mask interference for better mobility.
  5. Improved chest block design completely wraps the stomach and ribs for full protection on a shot from any angle.
  6. Removable front/side length extensions allow custom fit and pant integration options.

Pant
  1. HyperComp Flex Plates provide pro level protection and unprecedented flexibility and mobility.
  2. Maximized thigh protection from high impact shots.
  3. AxyCut technology allows the goal pant to sit flush & square in the butterfly without leg pad interference.
  4. Reinforced high wear areas protect the pant from Velcro exposure.
  5. Removable internal belt provides snug, comfortable, easy to adjust fit while allowing the external pant to fit looser for un-restricted mobility.

Jock
  1. ShockShield Technology disperses energy from puck impacts away.
  2. Ergonomic abdomen pad flexes as the goalie gets into a deep crouch.
  3. Customizable strapping allows goaltender to adjust jock setting for desired fit and feel.

Knee
  1. Wide profile for maximum coverage in the 5-hole area.
  2. HyperComp reinforced knee plate for increased protection and weight reduction.
  3. Optimized shock absorbing landing area for additional knee cushioning and support in the butterfly.

Chest & Arms
  1. HyperComp inserts increase protection and stability in high impact zones.
  2. AxyFlex & ShockShield arm design facilitates maximum range of motion and impact dispersion from puck impacts.
  3. Additional rib protection for RVH saves.
  4. Contoured shoulders for enhanced mobility.
  5. Removable front/side length extensions allow custom fit and pant integration options.
  6. Multiple strapping configurations for customizable fit and comfort.

Fantom Fit
  1. IMPAX & X Foam combine for maximum impact protection.
  2. OMNIshock+ molded dual density foams for comfort & protection.
  3. Minimus Carbon G1200 - Super strong & lightweight shell.
  4. Polygene sweatband inhibits the growth of odor causing bacteria.
  5. Easily adjustable chin cup for proper fit & feel.
  6. Optimized chin shape for improved mobility.

Lightweight
  1. Super lightweight goal stick for quicker stick & blocker saves and reduced arm fatigue during play.
  2. Minimus Carbon G1200 reduces weight & increases durability from puck impacts.

Grip & Balance
  1. SlideGrip Technology provides grip to securely hold the stick while enhancing quick sliding blocker transitions for pokechecks and passing positions.
  2. HiFused Construction creates neutral balance for optimum feel.

Feel & Performance
  1. ibexLite reduces the shock of vibrations that travel through the stick to the blocker hand.
  2. Impact Fiber Layer provides an additional layer of carbon fiber on the front face & edges of the shaft to increase durability against puck impacts.
  3. TwinSpar reinforcement improves blade stability for enhanced shooting & rebound control.

MINIMUS CONSTRUCTION
  1. New paddle geometry for weight reduction and quick release flex profile.
  2. Minimus Carbon G1400 reduces weight & increases durability from puck impacts.
  3. Matte finish blade and paddle for weight reduction.

Grip & Balance
  1. SlideGrip Technology provides grip to securely hold the stick while enhancing quick sliding blocker transitions for pokechecks and passing positions.
  2. HiFused Construction creates neutral balance for optimum feel.

Feel & Performance
  1. Matte finish for weight reduction.
  2. Impact fiber layer provides an additional layer of carbon fiber on the front face and edges of the shaft to increase durability against puck impacts.
  3. TwinSpar reinforcement improves blade stability for enhanced shooting & rebound control.